ISOTHANEâ 3000 F Series
Polyether based TPU Resins
FDA Grade
Characteristics:
ISOTHANE 3000 F series
products are polyether based thermoplastic polyurethanes. They exhibit
excellent hydrolytic
resistance, fungus resistance, and low temperature performance properties.
These products can be
injection molded, blow molded, and extruded. They are in compliance with
FDA CFR177.105,
177.1680, and 177.2600.
Suggested Applications:
Sheets, Film, Tube,
and Conveyor Belts.
Properties:
Items |
Units |
ASTM |
3080AF |
3085AF |
3090AF |
Specific Gravity |
gr./cm3 |
D-792 |
1.13 |
1.13 |
1.14 |
Hardness |
Shore A D |
D-2240 |
82A |
85A |
90A |
Tensile Strength |
Mpa psi |
D-412 |
33 4800 |
36 5200 |
41 6000 |
Tensile Modulus |
|
D-412 |
|
|
|
@ 50% elongation |
Mpa Psi |
3.8 550 |
4.5 650 |
6.2 900 |
|
@ 100% elongation |
Mpa Psi |
5.2 750 |
5.9 850 |
8.3 1200 |
|
@ 300% elongation |
Mpa Psi |
11 1600 |
12 1800 |
17 2400 |
|
Elongation @ break |
% |
D-412 |
620 |
600 |
550 |
Compression Set 22 hrs @ 23℃ 22 hrs @ 70℃ |
% % |
D-395 (B) |
30 35 |
30 35 |
25 40 |
Tear Strength |
N/mm lb/in |
D-624 DIE C |
550 100 |
600 110 |
700 120 |
Abrasion Resistance |
mg (loss) |
D-1044 (Taber) H-22 |
20 |
20 |
50 |
The above values are shown as
typical values and should not be used as specifications.