ISOTHANEâ
1000 F Series
Poly(adipate)ester
based TPU Resins
FDA Grade
Characteristics:
ISOTHANE 1000 F series
products are polyester poly(adipate)ester based thermoplastic polyurethanes.
They exhibit excellent
toughness, abrasive resistance and solvent resistance.
These products can be
injection molded, blow molded, and extruded.
They are in compliance
with FDA CFR 177.105, 177.1680, and 177.2600 requirements.
Suggested Applications:
Sheets, Film, Tube,
and Conveyor Belts.
Properties:
Items |
Units |
ASTM |
1080AF |
1085AF |
1095AF |
Specific Gravity |
gr./cm3 |
D-792 |
1.18 |
1.18 |
1.21 |
Hardness |
Shore A D |
D-2240 |
82A |
85A |
95A |
Tensile Strength |
Mpa psi |
D-412 |
33 4800 |
36 5200 |
34 5000 |
Tensile Modulus |
|
D-412 |
|
|
|
@ 50% elongation |
Mpa Psi |
3.4 500 |
4.1 600 |
10 1500 |
|
@ 100% elongation |
Mpa Psi |
4.8 700 |
6.2 900 |
12 1700 |
|
@ 300% elongation |
Mpa Psi |
12 1700 |
13 1900 |
24 3500 |
|
Elongation @ Break |
% |
D-412 |
600 |
580 |
470 |
Compression Set 22 hrs @ 23℃ 22 hrs @ 70℃ |
% % |
D-395 (B) |
25 75 |
25 75 |
30 75 |
Tear Strength |
N/mm lb/in |
D-624 DIE C |
80 480 |
80 480 |
110 600 |
Abrasion Resistance |
mg (loss) |
D-1044 (Taber) H-22 |
15 |
20 |
60 |
The above values are shown as
typical values and should not be used as specifications.