1000 E Series
Poly(adipate)ester
based TPU Resins
Elite Grade
Characteristics:
ISOTHANE 1000 E series
products are polyester poly(adipate)ester based thermoplastic
polyurethanes with good
balanced qualities. They exhibit
good toughness, abrasive resistance,
solvent resistance,
and transparency. These products
can be injection molded, blow molded,
and extruded.
Suggested Applications:
Sheets, Film, Tube,
Shoe Sole, and Shoe Upper.
Properties:
|
Items |
Units |
ASTM |
1080AE |
1090AE |
1095AE |
1055DE |
|
Specific Gravity |
gr./cm3 |
D-792 |
1.16 |
1.18 |
1.21 |
1.18 |
|
Hardness |
Shore A D |
D-2240 |
82A |
90A |
95A |
53D |
|
Tensile Strength |
Mpa psi |
D-412 |
28 4000 |
29 4200 |
38 5600 |
41 6000 |
|
Tensile Modulus |
|
D-412 |
|
|
|
|
|
@ 50% elongation |
Mpa Psi |
3.7 540 |
6.9 1000 |
8.3 1200 |
9.0 1300 |
|
|
@ 100% elongation |
Mpa Psi |
4.8 700 |
9.0 1300 |
9.7 1400 |
12 1800 |
|
|
@ 300% elongation |
Mpa Psi |
8.3 1200 |
12 1800 |
21 3100 |
24 3500 |
|
|
Elongation @ Break |
% |
D-412 |
550 |
540 |
500 |
480 |
|
Compression Set 22 hrs @ 23℃ 22 hrs @ 70℃ |
% % |
D-395 (B) |
25 75 |
30 70 |
30 75 |
25 35 |
|
Tear Strength |
N/mm lb/in |
D-624 DIE C |
80 460 |
90 530 |
100 570 |
110 630 |
|
Abrasion Resistance |
mg (loss) |
D-1044 (Taber) H-22 |
30 |
60 |
60 |
60 |
The above values are shown as
typical values and should not be used as specifications.