ISOPAK® 569
Product |
: ABS RESINS |
Grade Characteristic |
: Extrusion
Grade / Good for
Thermo-Forming |
TYPICAL PHYSICAL PROPERTIES
PROPERTIES |
Test Method |
Test Condition |
Unit |
Value |
Izod Impact Strength (Notched) |
D256 Method A |
23℃ 1/8¨x1/2¨x5/2¨ |
kg-cm/cm |
30 |
Melt Flow Index |
D1238 |
220℃, 10kg/cm2 |
g/10mins |
12±2 |
Tensile Strength at Yield at Break |
D638 |
23℃, 1/8¨ 5.0mm/min |
kg/cm2 |
400 340 |
Flexural Yield |
D790 |
23℃ 2.8mm/min |
kg/cm2 |
640 |
Heat Distortion Temp. |
D648 |
18.56kg/cm2 1/2¨x1/2¨x5¨ Unannealed |
℃ |
86 |
Rockwell Hardness |
D785 |
23℃ |
R Scale |
107 |
Specific Gravity |
D792 |
23℃ |
|
1.03 |
Flammability |
UL-94 |
1/16¨ sample |
|
HB |
While the above information is presented in good faith and believed to
be accurate, GRECO does not guarantee
satisfactory results from reliance upon such information and disclaims
all liability for any loss or damage arising out
of its use.